Thermic Fluid Heater - Oil-Gas Fired

“THERMOTECH” : THERMIC FLUID HEATER’S are available in HORIZONTAL & VERTICAL MODELS where in thermic fluid can be heated up to normal 340 ^oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel. 

The Main Heat Exchanger is designed with an integrated combustion chamber made out of High Heat Resistant Steel Tubes : BS 3059 P-1 or Seamless Pipes : SA106 Gr.B S40 of adequate size, explicitly designed with twin concentric multi start helical coil. The Coil is inserted into M.S. Shell with structures supports to place complete assembly leveled.

The system is 3 pass on flue gas side, which ensures optimum heat transfer with counter current flow principle. The combustion chamber is designed to maintain safe distance between coil tube surface and burner flame, which ensures optimum heat transfer, long thermic fluid life due to lesser film temperature & safety of helical coil tube, which ultimately safeguards the complete heat exchanger.

 

HORIZONTAL UNIT WITH EXTERNAL AIR PRE HEATER

This new “HT” series of Thermic Fluid Heater – Horizontal model is improved version, which have demonstrated their good design & to which new Technologies & Materials are added to improve efficiency up to 93%, energy saving, simplify the maintenance, low smoke emission & able to integrate with PLC & SCADA system with ease.

The Stack Heat from Exhaust flue gases of Main Heat Exchanger are recovered by means of Combustion Air Pre Heater (CAPH) & fresh combustion air is preheated before going to burner, which improves combustion efficiency, reduces stack temperature, reduce fuel consumption & save environment.

 

 

THE  COMBUSTION FUELS :

“THERMOTECH” : Thermic Fluid Heaters are designed for all commercial & special fuels available in market for combustion.

Fuels like : Kerosene / Diesel / Light Diesel Oil (LDO-LFO) / Furnace Oil (HFO) / Natural Gas / LPG / Pipeline N. Gas, etc. are combustible with same efficiency, which is thankful to our combustion experts who designs combustion parameters & Air to fuel ratio for best output.

 

Thermotech's, this new “HT” series of Thermic Fluid Heater – Horizontal model is improved version, which have demonstrated their good design & to which new Technologies & Materials are added to improve efficiency up to 93%, energy saving, simplify the maintenance, low smoke emission & able to integrate with PLC & SCADA system with ease.

The Stack Heat from Exhaust flue gases of Main Heat Exchanger are recovered by means of Combustion Air Pre Heater (CAPH) & fresh combustion air is preheated before going to burner, which improves combustion efficiency, reduces stack temperature, reduce fuel consumption & save environment.

 

All the HORIZONTAL type Thermic Fluid Heaters are equipped with a reputed make Monoblock or Dualblock Burner with on-off / 2 stage / progressive modulation - suitable for fuel specified by client & selected as per the capacity of Thermic fluid heater.

The Heating & Pumping system for Heavy Fuel Oil and Gas Train for Natural Gas / LPG are supplied with equipments as an optional equipment for efficient and safe operation of Burner.

 

Thermotech's unique design of thermic fluid heater is also extended for hazardous zone application with supply of more than 10 systems suitable for zone 2 & 3. The burner used for combustion is hazardous zone compatible with well recognition & acceptability in industry of oil & gas sector. The design is completely on skid mounted with remote plc operations, which makes lesser erection time & quick commissioning.
the system is suitable for combustion of fuels like : heavy oil, ldo, gas, hydrogen, propane, etc.
for, more details, kindly contact our sales team.

Thermotech had engineered, designed & conquered great success in developing Thermic Fluid Heater suitable for Hazardous Zone. The system comprises of all instruments, burner, safeties confirming to applicable hazardous zone area. The fuel handling system is also designed & supplied as per specific zone requirement.

Thermotech, gives complete solution for Pipeline activity related to Thermic Fluid System.We also provide Thermic Fluid Pipeline for forward & return header line on Skid Mounted basis to reduce erection time & facilitate quick commissioning of system. All controls, electrical cables are mounted on skid itself with proper junction box interconnected.

Being an eminent organization, we hold expertise in offering a wide range of Vertical Thermic Heaters. These are manufactured by us using quality materials, which are procured from reliable vendors of the market. Owing to their superior quality and reliable performance, these thermionic heaters are widely demanded across various Industries for firing of fuel like bagatelle and husk. To cater the variegated requirements of the customers, these are offered by us in various technical specifications.